Biuged BGD 527 Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Испытательное оборудование Biuged BGD 527. Biuged BGD 527 8 страниц. Wet abrasion scrub tester
Печатать страницу
1.0
Application:
Paint often become soiled especially near doorways, windows, and in work and play areas.
Coated surfaces need to be tested for resistance to abrasion caused by a brush, sponge, or other means.
The Wet Abrasion Scrub Tester can produce a repeatable, controlled condition to simulate everyday use
or wear patterns.
BGD 526 Wet Abrasion Scrub Tester is the newest machine which is developed by Biuged . It
can examine washability and related properties that affect the stain resistance of coatings. Detergent
performance testing can also be determined in a reproducible manner.
It accords with standards such as ASTM D2486、ASTM D 3450、DIN EN 11330、ISO 11998 etc.
Feature ：
◆ Running speed can be set to meet requirements of different standards.
◆ With four-digit counter, start the machine and it will automatically be stopped when reaching set
times.
◆ Compatible with a variety of abrasion pads to comply with different standards requirements, such as
ISO, ASTM, DIN etc..
◆ Quickly and easily to load and unload testing samples and replacing abrasion head.
◆ Can work normally under different voltage and frequency
◆ With stable and uniform running speed because of Push-rod design
◆ Features two brush holders for side by side testing
◆ Long service life with hard and durable design
◆ The whole machine body is made of anodized aluminum, having stable working status, repeatable
test results, no exception even in the fastest speed of the stroke.
◆ Liquid solutions are pumped to the brush heads from the detachable container mounted to the side of
the tester. The pump may be switched on or off during the course of testing, and the flow can be
adjusted for precise dosing.
2.0
Main Technical Parameter
2.1 Specification of brush：evenly distributed 60-diameter 3 holes on the 38×90mm base board, with
pig bristle inserted, length of feather 19mm.
2.2 Weight of brush （including device holding brush） ： 454±10 g （ASTM D 2486） ； 135±1g （ISO 11998）
2.3 Stroke Length：300mm
2.4 Frequency of travel ：5～95 times/min（adjustable）
2.5 Range of count： 9999 times
2.6 Size of test plate： 430×150×0.03mm
2.7 Power of motor：25W
2.8 Power：110V～220V；50/60 Hz
2.9 Overall size： 500×460×280mm
2.10 Capacity of Water Container：5L