Cisco Cisco Headset 561 Руководство - Страница 32

Configure a Headset on the Phone

Procedure

Step 1

Press Applications

Step 2

Select Accessories and then your headset.

Step 3

Navigate to Setup > Microphone > Test.

Step 4

Press Record and speak into the microphone.

Step 5

Press Stop rec when you finish speaking.

Step 6

Press Play to review your test recording.

Configure a Headset on the Phone

After you have connected the headset, you may have to configure it on your phone.

If you have a Cisco headset with a USB adapter, then follow the steps in

page 29

Reset Cisco Headset Settings from Your Phone

You can reset your Cisco headset to remove your custom settings. This action returns the headset to the original

configuration set by your administrator.

Your phone must be running Firmware Release 12.5(1)SR3 or later for this feature to function.

Before you begin

Connect your headset to the phone:

• Cisco Headset 520 Series: Connect with the USB adapter

• Cisco Headset 530 Series: Connect with the USB cable

• Cisco Headset 560 Series: Connect the standard base or multibase with the USB or Y-cable.

Procedure

Step 1

On the phone, press Applications

Step 2

Select Accessories > Setup > Reset settings.

Step 3

At the warning window, select Reset.

Adjust the Headset Feedback

When you use a headset, you can hear your own voice in the earpiece, which is called headset sidetone or

headset feedback. You can control the amount of headset sidetone on your phone.

Headsets

Cisco Headset Customization, on