Cisco Cisco Headset 562 Краткое справочное руководство

Cisco Headset 561 and Cisco Headset 562 with Standard Base

For Cisco Jabber

Power/Call

Mute

Volume +/-

High Sound Pressure—Avoid listening to high volume levels for long periods to prevent

possible hearing damage.

When you plug in your headset, lower the volume of the headset speaker before you put

the headset on. If you remember to lower the volume before you take the headset off, the

volume will start lower when you plug in your headset again.

Be aware of your surroundings. When you use your headset, it may block out important

external sounds, particularly in emergencies or in noisy environments. Don't use the

headset while driving. Don't leave your headset or headset cables in an area where

people or pets can trip over them. Always supervise children who are near your headset

or headset cables.

Headset LED status indication

Incoming Call

Active Call

Headset paired with dock

Headset and dock not paired

Base LED status indication

Battery strength

System updating

Headset and dock not paired

Call Indication

Incoming call

Blinking green

Active call

Steady green

Muted call

Steady red

Quick Reference Guide

Blinking red

Steady red

White LED blinking every 4 seconds

White LED blinking rapidly

LEDs show solid as battery charges

LEDs blink in sequence from left to right

All LEDs blinking