Epson EB-L260F Быстрая настройка - Страница 2
Просмотреть онлайн или скачать pdf Быстрая настройка для Проектор Epson EB-L260F. Epson EB-L260F 4 страницы.
Печатать страницу
Turn on your equipment
1
Turn on your computer or video source.
2
Make sure the power cord is connected and plugged into an
electrical outlet.
3
Open the projector's lens cover.
4
Press the
power button on the projector or remote control. The
projector beeps, and the Status light flashes blue and then stays on.
Note: To shut down the projector, press the
5
Follow the on-screen instructions to set up your projector. If you see
a screen displaying 123, select the upright option and press
remote control to continue.
Note: To change these settings, see the online User's Guide.
6
If you don't see an image, do one of the following:
•
Press the Source Search button on the remote control to select the
image source.
•
Press the Home button on the remote control. Use the arrow buttons
to highlight any of the options on the Home screen, then press
select it.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
7
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Management and press
. Select Language and press
language and press
. Press the Menu button to exit the menu system.
Adjust the image
1
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
2
To reduce or enlarge the image, rotate the zoom ring on the projector.
power button twice.
on the
to
. Select your
3
To sharpen the image, turn the focus ring on the projector.
4
If your image looks like
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can't
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
5
Your projector automatically adjusts an image that looks like
but if necessary you can press the
correct it.
Wireless network
configuration
Follow these steps to set up the projector for a wireless network connection.
1
Press the Menu button on the remote control.
2
Select the Management menu and press
3
Select On as the Wireless LAN Power setting.
4
Select the Network menu and press
5
Select Network Settings and press
6
Select Wireless LAN as the Priority Control Interface setting.
7
Select one of the following as the Simple AP setting:
•
On for a direct connection to a computer, tablet, or smartphone.
•
Off to connect your projector to a router or access point.
Note: If you directly connect to the projector, you can only project locally
stored content.
8
Select any other wireless settings as necessary. See the online User's Guide
for details.
9
When you are finished, return to the Network Settings menu and select
Set to apply your settings.
10
Press the Menu button to exit the menu system.
Wired network
configuration
Follow these steps to set up your projector for a wired network connection.
1
Press the Menu button on the remote control, select the Network menu,
then press
.
2
Choose Network Settings and press
3
Select Wired LAN as the Priority Control Interface setting.
or
, you may have placed the projector
or
button on the projector to
.
.
.
.
or
,