Ricoh Pro C900 Руководство по установке - Страница 21

Просмотреть онлайн или скачать pdf Руководство по установке для Принтер Ricoh Pro C900. Ricoh Pro C900 24 страницы. Color server options
Также для Ricoh Pro C900: Брошюра и технические характеристики (6 страниц), Брошюра и технические характеристики (8 страниц), Дополнение для пользователей (24 страниц)

Печатать страницу

1. Machine Run-Up and Installation Requirements

□

Ring Binder (RB5000)

□

Stacker (SK5000)

□

3000 sheet finisher (SR5000).

□

Plockmatic

□

Perform the peripheral skew and side to side adjustment:

□

Print two copies of final version full SMC reports and Fiery

Configuration Pages.

Colour High Volume Production System - Installation Guide

Pro C900

a. Print a single page punch only output and check the

location of the punched holes. Refer to the Ring Binder

service manual for full details. Adjust using SP6-504 if

required.

b. Print a ring bound booklet to the maximum allowable

thickness, using each one of the ring binder cartridges

purchased. Ensure that each binding comb is closing

correctly.

□

GBC Stream Punch III

a. Follow the Ricoh GBC Stream Punch III Installation and

Set–up document that is supplied with the GBC Stream

Punch III and also available at

http://partners.ricoh.com.au/web/aubase/technical/docum

ents.nsf/allbymodel/C74C98B6BE92DE89CA2572F000175C

AB?OpenDocument

b. Punch 50 sheets from each one of the die sets and confirm

all punch holes are positioned correctly and that the die

sets are perforating the media fully.

a. If required, the Lead Edge and Side to Side Jogger

position can be adjusted. Please refer to the Pro C900 /

Pro C00s and the Stacker Service Manuals for full details.

a. If a punch unit is installed print a 5-page punched

document.

b. Check the position of the punch holes. If the punch holes

are not correctly positioned in the front to rear position,

install spacers (to the rear of the SR5000) provided with

the punch unit. See the SR5000 Service Manual for

details.

c. If the punch holes are not positioned correctly in the left

to right direction, adjust SP6-101.

d. Print a 20-page document with corner staple. If the sides

of the stack do not appear aligned, adjust SP6-102.

a. Follow the service manual for the BK5010e system checks.

Available at

http://partners.ricoh.com.au/

a. The paper feed path can be very long. The cumulative

effect of such a long path can result in paper skewing and

deviating in the side to side direction at the paper exit.

Page 21 of 24