Ricoh Pro L4160 Руководство по уходу и обслуживанию - Страница 8

Просмотреть онлайн или скачать pdf Руководство по уходу и обслуживанию для Принтер Ricoh Pro L4160. Ricoh Pro L4160 29 страниц. Wide format color digital imaging system
Также для Ricoh Pro L4160: Меры предосторожности (17 страниц), Технические характеристики (4 страниц), Руководство по печати (8 страниц)

Replacing the wiper

The wiper is consumable.When the display indicates that it is necessary to

check and replace the wiper, immediately replace the wiper with a new one.

Also, wipe ink sticking to the lower surface of the slider off.

• When the warning message for replacing wiper is shown, confirm whether there is no damage and

fuzz at the top edge of the wiper film. If there is no damage on the top edge of the wiper film, it is

possible to use the wiper continuously without replacing it.

• A wiper is a consumable. Buy one through the dealer in your region or at our service office.

• When you replace it before the message is displayed, first perform carriage out and then replace it.

After replacing, reset the counter for the number of times the wiper was used.

Press the

• The carriage moves to the maintenance position.

• If the carriage is not covered by the ink cap for a long period of time,

the nozzle face of the head may get dry and clogged, resulting in

white lines being left in the printed image.

• The buzzer sounds periodically while the carriage is out of the

capping station. The buzzer sounds at shorter interval when the print

heater temperature is high.

• Until the replacement work is completed, [COMPLETED: ent] is displayed on the screen.

Open the rght maintenance cover then remove the

wiper.

• Pull out the wiper by holding the protrusions at its both ends.

Insert a new wiper.

• Insert a new wiper by holding its both ends.

Close the right maintenance cover then press the

key.

• After its initial operation, the machine returns to LOCAL.

key in LOCAL.

MAINT.

key.

After the work up to the Step 4 is completed and you close the right maintenance cover,

press the

key.

< L OCA L >

RE P L ACE WI P ER [ M N T ]

RE P L ACE WI P ER

E X ECU T E

[ EN T ]

RE P L ACE WI P ER

COMP L E T ED

[ EN T ]

Projection

C l o s e a c o v e r

P L E A SE WA I T