Ricoh Rex-Rotary C7116 Дополнительное руководство - Страница 13

Просмотреть онлайн или скачать pdf Дополнительное руководство для Принтер Ricoh Rex-Rotary C7116. Ricoh Rex-Rotary C7116 38 страниц. Unix supplement

After Executing Installation Shell Script

The printing environment is setup automatically when the installation shell
script is executed.
This section describes the setup contents when the installation shell script is ex-
ecuted under Red Hat Linux, Solaris and HP-UX.
Linux
❖ ❖ ❖ ❖ Adding the IP address and host name to the /etc/hosts file
The following line is added to the /etc/hosts file. The IP address and printer
host name which you previously entered in the installation script will be
used.
192.168.15.16 nphost # Network Printer
• 192.168.15.16 is the IP address, nphost is the host name, from # to the end
of the line is a comment.
Note
❒ The /etc/hosts file contains a list of the IP addresses and host names of all
of the hosts communicating on the network. Each entry is delimited with
a space or a tab, and each line is separated with a return.
❒ If you do not use NIS or DNS, you must manually enter the IP address and
host name of each workstation using the network printer in the /etc/hosts
file.
❖ ❖ ❖ ❖ Adding an entry to the /etc/printcap file
The following entry is added to the /etc/printcap file, which is the configu-
ration for printing with the lpr command. In order to use the lpr command to
print, you need to edit the /etc/hosts file, add an entry for the network print-
er to the /etc/printcap file and create a spool directory.
##PRINTTOOL3## REMOTE
np|Network Printer:\
:rm=nphost:\
:rp=option:\
:sd=/var/spool/lpd/npd:\
:lf=/var/log/npd-errs:\
:sh:\
:mx#0:
Using the Installation Shell Script
1
9