Cisco Unified 7912G Настройка параметров сети - Страница 8

Просмотреть онлайн или скачать pdf Настройка параметров сети для IP-телефон Cisco Unified 7912G. Cisco Unified 7912G 34 страницы. Ip talk series
Также для Cisco Unified 7912G: Руководство пользователя (21 страниц), Руководство пользователя (16 страниц), Руководство пользователя (25 страниц), Руководство по эксплуатации телефона (46 страниц), Краткая справка (2 страниц), Наглядное пособие (20 страниц), Справочное руководство (20 страниц), Руководство по установке (8 страниц), Краткая справка (4 страниц)

Печатать страницу
Cisco Unified 7912G Настройка параметров сети
Verifying Network Settings
Table 4-2
Network Settings
Network Setting
DHCP Server
BootP Server
MAC Address
Host Name
Domain Name
IP Address
Subnet Mask
TFTP Server 1-2
Default Router 1
DNS Servers 1-2
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-8
Description
Displays IP address of the Dynamic Host
Configuration Protocol (DHCP) server that the
phone uses to obtain IP address.
Indicates whether the phone obtains its
configuration from a Bootstrap Protocol (BootP)
server rather than a DHCP server.
Identifies the unique Media Access Control
(MAC) address of the phone.
Identifies the unique host name assigned to the
phone.
Identifies the name of the Domain Name System
(DNS) domain in which the phone resides.
Indicates the Internet Protocol (IP) address of the
phone.
Indicates the subnet mask used by the phone.
TFTP Server 1 indicates the primary Trivial File
Transfer Protocol (TFTP) server used by the phone
to obtain configuration files.
TFTP Server 2 displays the IP address of the
backup TFTP server, which is used to obtain
configuration files and software upgrades if the
primary TFTP server is unavailable.
Identifies the default gateway used by the phone.
Indicates the Domain Name System (DNS) server
used by the phone to resolve the host name of the
TFTP server, Cisco Unified CallManager system
and web server host names.
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Usage Notes
See the
"Modifying DHCP
Settings" section on
page
4-13.
Always displays No.
Cannot be configured.
Cannot configure.
Obtained from the DHCP
server.
See the
"Assigning a
Domain Name" section on
page
4-22.
See the
"Assigning an IP
Address" section on
page
4-18.
See the
"Assigning a Subnet
Mask" section on page
See the
"Assigning a TFTP
Sever" section on page
See the
"Assigning a Default
Router" section on
page
4-19.
See the
"Assigning DNS
Servers" section on
page
4-24.
OL-8617-01
4-21.
4-29.