Ricoh R10 Инструкции по обновлению прошивки - Страница 2

Просмотреть онлайн или скачать pdf Инструкции по обновлению прошивки для Цифровая камера Ricoh R10. Ricoh R10 5 страниц. Lcd color balance adjustment file rewriting instruction manual
Также для Ricoh R10: Брошюра и технические характеристики (6 страниц), Руководство по управлению цветом (5 страниц)

2. Extract the firmware

Download the firmware from the Ricoh website.

Double-click or right-click and select [Open] on the downloaded file.

• A dialog screen appears.

Click [OK].

• The folder [R10 Update] is created, and the firmware is extracted to the folder [Firmware

relX.XX (where X.XX is the version number)]. Check that [elaunch3] (firmware file),

[elaunch4] (extension file), and [elaunch8] (adjusted value file) are inside the folder

[Firmware relX.XX].

For Windows

3. Copy the firmware to an SD memory card

There are two ways to copy the firmware into an SD memory card.

• With an SD memory card loaded in the camera, connect the camera and computer with the

provided USB cable, and copy the firmware to the SD memory card

• Using a card reader or a card writer, copy the firmware to an SD memory card (a card reader

or card writer is required)

To copy the firmware by connecting the camera and computer with the USB

cable

If DSC Software is installed on your Windows PC, check that DL-10 is not

active.

If DL-10 is active, right-click on the DL-10 icon in the task bar, and click

[Exit].

• If the DL-10 icon is not displayed in the task bar, you do not need to perform Step 2.

Load a battery with adequate remaining power into the camera.

Load the SD memory card into the camera, and turn the power on.

Display the camera's Setup menu, select [Format [Card]], and press the

ADJ./OK button $.

elaunch3

elaunch4

elaunch8

For Macintosh

elaunch3

elaunch4

elaunch8