ACDC KF-20DW/ZCDC12V Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Кондиционер ACDC KF-20DW/ZCDC12V. ACDC KF-20DW/ZCDC12V 9 страниц.

ACDC 12V Air Conditioner

Installation

Unpack the shipping box and check if the equipment is damaged, missing, or

misplaced. The overall assembly is very simple and straightforward and can be done

independently.

2.1

The outdoor unit is mounted on backside of the truck. Special installation equipment is

required to mount the unit on the outer wall. First, mark the hole positions according to

the corrugated template (see below). There are 4 hole marks at 0.5" from the edges of

the corrugated template and another 4 hole marks at 4.25" apart from the outer hole

marks. Inner hole marks are reserved optional for the wall-mounted orientation. Drill

holes that are just large enough to slide the rivet nuts into. Drill bit size of 11mm (7/16")

is recommended for M8 rivet nuts. You may Rubber gaskets have already been

attached on the bottom of the 4 fixture legs. Keep the distance between the outdoor

unit and the indoor unit within 3m so the refrigerant hoses and electrical cable can

reach each other.

4 5/16"

16.5"

7 7/8"

0.5"

4.25"

Figure. Overlapping the corrugated template on the outdoor unit

2.2

The indoor unit is mounted inside the cab on the rear or side wall

the water can be drained properly. First, use the wooden board to provide a level surface. Open

the connector-retaining caps. You should be able to hear a hissing sound when you open them.

33.5"

Cool Air While Keeping the Earth Clean

Corrugated template

33.5" x 16.5"

Outdoor unit

. Maintain the level so