Ricoh D516 Технический бюллетень - Страница 18
Просмотреть онлайн или скачать pdf Технический бюллетень для Аксессуары для принтеров Ricoh D516. Ricoh D516 24 страницы.
Печатать страницуReissued:5-Dec-13
Model:
Large Capacity Tray RT5060 (D516)
5. Insert the jig (made of hard styrene foam) in the guide plate at the center, and wait for
approx 30 seconds. Then, repeat the Step 4 to check the results.
6. If there is any resistance even after performing the previous step, insert the jig in the
guide plate to the two positions shown in the photos below, and wait approx 30 seconds
for each position. Repeat Step 4 to check the results.
7. Connect the LCT to the mainframe to complete the procedure.
T
echnical
Fully insert the jig until it stops.
Insert the jig in the positions
corresponding to the outer
edges of the rollers.
Fully insert the jig until it stops.
B
ulletin
Date:
6-Nov-13
PAGE: 5/7
No.:
RD516005