Epson EMP 7900 Руководство по работе с сетью - Страница 32

Просмотреть онлайн или скачать pdf Руководство по работе с сетью для Проектор Epson EMP 7900. Epson EMP 7900 43 страницы. Esc/vp21 command user's guide for business projectors
Также для Epson EMP 7900: Технические характеристики (2 страниц), Руководство пользователя (25 страниц), Технические характеристики (4 страниц), Руководство пользователя (25 страниц), Руководство пользователя (28 страниц), Руководство пользователя (28 страниц)

Configuring the Network Interface Using EpsonNet Config

With a Web Browser

After you have assigned an IP address to the network interface using the

printer's control panel, EpsonNet Config, or a DHCP server, you can configure

the network interface using EpsonNet Config with Web Browser.

Note:

❏ A Web browser must be installed on your computer.

❏ TCP/IP must be correctly set for the computer and the network interface.

Follow the steps below to change the IP address using EpsonNet Config.

1. Turn on your printer.

2. Run EpsonNet Config in one of the following ways.

❏ Run EpsonNet Config for Windows or Macintosh. Select the printer you

want to configure from the list and then click Launch Browser.

❏ Open your browser, and then type in the IP address of the network

interface directly. Do not run EpsonNet Config for Windows or

Macintosh.

http://IP address of network interface/

Example: http://192.168.100.201/

Note:

To check the IP address of the network interface, use EpsonNet Config. See

"About EpsonNet Config" on page 29 for Windows users, or see "About EpsonNet

Config" on page 30 for Macintosh users for details.You can also print a Network

Status Sheet from the printer's control panel. See "Printing a Network Status

Sheet" on page 18 for instructions.

3. Click TCP/IP under Network on the Configuration menu to display the

TCP/IP setting screen.

4. Select a method for acquiring the IP address. When you select Auto,

DHCP becomes available and assigns an IP address automatically. If you

want to set the IP address manually, select Manual.

Network Software