Cisco 4000 Series Подготовка к установке - Страница 9

Просмотреть онлайн или скачать pdf Подготовка к установке для Сетевой маршрутизатор Cisco 4000 Series. Cisco 4000 Series 11 страниц. Upgrading memory
Также для Cisco 4000 Series: Руководство (18 страниц), Руководство по установке (18 страниц), Руководство по замене (16 страниц), Руководство по обновлению (24 страниц)

In addition, you might need the following additional external equipment:

•

Data service unit (DSU) to connect each serial port to an external network.

•

To connect a serial port to a T1 network, you need a T1 channel service unit/data service

unit (CSU/DSU) that converts the High-Level Data Link Control (HDLC) synchronous

serial data stream into a T1 data stream with the correct framing and ones density.

(Some telephone systems require a minimum number of one bit per time unit in a data

stream, called ones density.) Several T1 CSU/DSU devices are available as additional

equipment, and most provide either a V.35, EIA/TIA-449, or EIA-530 electrical

interface.

•

Ethernet transceiver.

•

Network Terminator 1 (NT1) for BRI connections in North America.

•

Before installing a G.703/G.704 network processor module, ensure that you have one

of the following adapter cables:

— 75-ohm, unbalanced adapter cable (CAB-E1-BNC-3M)

— 120-ohm, balanced adapter cable (CAB-E1-TWINAX-3M)

Inspecting the System

Before unpacking the system, make certain that you are ready to install it. If the ﬁnal

installation site is not ready, keep the chassis in its shipping container to prevent accidental

damage. After determining where you want the system installed, proceed with the

unpacking.

The router, cables, publications, CD, and any optional equipment you ordered might be

shipped in more than one container. When you unpack each shipping container, check the

packing list to ensure that you received all of the following items:

•

Router

•

6-foot (1.8-meter) power cord

•

Bag of rubber feet for desktop mounting

•

Optional equipment (which might include network connection cables)

Preparing to Install Cisco 4000 Series Routers 2-9

Inspecting the System