Epson Home Cinema 2100 Быстрая настройка
Просмотреть онлайн или скачать pdf Быстрая настройка для Проектор Epson Home Cinema 2100. Epson Home Cinema 2100 4 страницы. Ink system eco-flo continuous ink system permajet
Также для Epson Home Cinema 2100: Инструкции по сборке (13 страниц)
Печатать страницу
Home Cinema 2100/2150
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Note: Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Video device or computer
Connect one end of an HDMI cable to one of the projector's HDMI ports and
the other end to an HDMI port on your video device or computer.
Note: For information on connecting the projector to your computer or other
devices (camera, USB flash drive, etc.), see the online User's Guide.
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI1 MHL port.
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device's documentation for
more information.
Note: For information on wireless screen mirroring (Home Cinema 2150), see
the online User's Guide.
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a video source
(DVD player, streaming device, etc.) connected by an HDMI cable.
External audio device
You can also play audio through an external audio device by connecting the
projector to your home theater receiver or directly to external speakers.
Note: Connecting an external audio device disables the projector's internal
speaker. If you do not hear sound from an HDMI source, set the connected
device to PCM output.
Home theater system
Surround sound
Note: See your home theater receiver documentation for more information
on connections.
HDMI cable
MHL cable
Streaming device
Video source
Video cable
Receiver
Projector
Powered speakers or headphones
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
3
Open the A/V Mute slide all the way.
4
Press the
power button on the projector or remote control. The status
light flashes blue and then stays on.
Note: To shut down the projector, press the
5
Use the arrow buttons on the remote control to highlight any options
on the Home screen that appears, then press Enter to select it. You can
switch between projection sources and quickly access various adjustment
options from this screen.
6
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press Enter. Select Language and press Enter.
Select your language and press Enter. Press the Menu button to exit the
menu system.
3.5 mm stereo
mini cable
power light on the projector turns blue.
power button twice.