Epson Home Cinema 5050UB Быстрая настройка - Страница 2
Просмотреть онлайн или скачать pdf Быстрая настройка для Проектор Epson Home Cinema 5050UB. Epson Home Cinema 5050UB 4 страницы.
Печатать страницу
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector.
3
power button on the projector or the On button on the
Press the
remote control. The shutter opens and the
then stays on.
Note: To shut down the projector, press the
projector or the Standby button on the remote control, then press the
button again to confirm, if necessary. Wait for cooldown to complete
before unplugging the projector.
4
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen that appears, then press Enter to select it.
You can display a QR code, switch between projection sources, and quickly
access various adjustment options from this screen.
5
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press Enter. Select Language and press Enter.
Select your language and press Enter. Press the Menu button to exit
the menu system.
power light flashes blue,
power button on the
Using the remote control
Install the batteries as shown (two AA batteries).
Turn projector on
Choose which source to
display
Control connected
sources with HDMI
Link
Adjust zoom, focus,
and lens shift
Access projector menus
For more information on using the remote control, see the online User's Guide.
Adjust the image
1
Press the Pattern button on the remote control to display a test pattern.
2
To raise the image or correct a tilted image, adjust the front feet as
shown below.
3
Press the Lens button on the remote control and use the
to focus the image.
Turn projector off
Turn off projector
display
Navigate projector
menus
Control WirelessHD
functions
and
buttons