c3controls 900-SBA8I4OM Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Реле c3controls 900-SBA8I4OM. c3controls 900-SBA8I4OM 17 страниц. Smart programmable relays

Печатать страницу
FUNCTIONS
CREATING OR EDITING A PROGRAM
To create a new program or edit an existing program, select the PROGRAM
option from the main menu by pressing OK. Then select the EDIT option to
create or edit.
INSERTING A CONTACT
1. Place the blinking cursor in the required position.
2. Press ALT.
3. Choose the required element using the Up or Down keys.
4. Use the Right Arrow key to move to the number.
5. Choose the number using up or down keys.
6. Press ALT or Right Arrow to accept and to go to the next position.
ALT
I 2
OK
INSERTING A COIL
1. Place the blinking cursor in the required position.
2. Press ALT.
3. Choose the required element using the Up or Down keys.
4. Use the Right Arrow key to call-up the number.
5. Choose the number using Up or Down keys.
6. Use the Left Arrow key to move to the type of coil.
7. Choose the type of coil using Up or Down keys.
8. Press ALT or Right Arrow to accept and to go to the next position.
I 1
I 1 — Q 1
ALT
ENTERING A LINK
1. Place the blinking cursor next to the desired location.
2. Press OK to start the link ("
", "cursor").
3. Move the cursor to the desired location using the arrow keys.
4. As the cursor moves, the link is drawn.
5. Press OK to exit to normal mode.
6. Repeat this action as many times as necessary to link all the elements
together as required.
I 1 — Q 1
I 1 — Q 1
OK
Q 2
Q 2
DELETING A PROGRAM LINE
Move the cursor to the first column of the line, if necessary delete the
elements one by one to create a blank line. Press DEL. The line is deleted.
It is also possible to delete the entire program stored in the Series 900 relay.
To do this, call up the "DELETE" option in the Program menu and validate the
deletion of all program lines.
REPLACING A LINK WITH A CONTACT
To replace a link with a contact, simply place cursor at the required location
and press ALT to enter the contact.
CHANGING AN ELEMENT
To change an element in an existing program, simply move to the element to
change, press ALT and follow the same procedure as when entering a new element.
DELETING AN ELEMENT
To delete an element, simply place the cursor on the required element, and
then press DEL. Generally, the deleted element must be replaced by a link.
DELETING LINKS BETWEEN ELEMENTS
To delete a link, simply move the cursor next to the desired position, press
the OK key to change the cursor to á and press the DEL. key. This may delete
some of the required connections, which may be restored by the same
method as above.
INSERTING A PROGRAM LINE
To insert a program line, simply move the cursor to the first column of the
line immediately above the one to create and press OK.
LIFETIME WARRANTY
GUARANTEED SAME-DAY SHIPPING
ADVANTAGE PRICING
I 1
I 1
Z3
Z4
I 2
I 1 — Q 2
I 1 — Q 2
Z3
ALT
I 1 — Q 1
I 2 — Q 1
Z2
OK
Q 2
TRANSFER
The TRANSFER function allows data to be transferred from Memory Card to the
Series 900 relay or vice-versa.
Transferring data to the memory card is useful when the user wants to load the
same program in many Series 900 relay units. In this case, instead of using PC,
user can make use of memory card, which is capable of storing one program. This
feature is particularly useful on the production line where user is not required to
edit and debug the program and a PC is not available. In this mode of transfer
"PASSWORD" and "UTILITIES" such as Backlit Configuration and Expansion
(Extension) module state will also get transferred with the program.
PROGRAM
RUN
PARAMETERS
UTILITIES
DEVICE TO CARD
1. Insert the Memory card in the connector after removing the serial cable, if
present.
2. Select the "TRANSFER" function from the "PROGRAM" menu.
3. Press the OK key to validate.
4. Select the Device > Card function.
5. Press the OK key to validate.
CARD TO DEVICE
This transfer is used to reload an application into the Series 900 relay. It avoids
the need to re-enter an existing application.
1. Insert the Memory card in the connector after removing the serial cable, if present.
2. Move cursor to the "TRANSFER" function from the "PROGRAM" menu.
3. Press the OK key to validate.
4. Select the Card > Device function.
5. Press the OK key to validate.
EDITING PARAMETERS OF SPECIAL FUNCTION BLOCKS
Parameters of special function blocks can be modified in two modes:
1. Run Mode
2. Program Stop Mode
RUN MODE
1. Enter the PASSWORD if it has been enabled.
2. Special function block with it's parameters set will be displayed.
3. Set parameters and press OK to save the parameters.
4. Press ESC to return to the RUN Mode menu.
5. Pressing ESC will return you to the RUN Mode menu and previous settings will
be retained.
Q 2
PAUSE
STOP
PAR RUN
PROG RUN
PAUSE
STOP
PAR RUN
PROG RUN
PROGRAM STOP MODE
1. Enter the PASSWORD if it has been enabled.
2. Press OK to save the parameters.
3. By pressing the ESC key the screen shown below will appear with the
following three options:
EDIT:
SAVE & EXIT: Save the parameters and come out of mode.
EXIT:
PROGRAM
RUN
OK
PARAMETERS
UTILITIES
PROGRAM
RUN
OK
PARAMETERS
UTILITIES
EDIT
CARD > DEVICE
OK
OK
DELETE
DEVICE > CARD
TRANSFER
DELETE CARD
MODBUS CON
PAUSE
D
TRG
T1
OK
ESC
STOP
RES
X
S
000.0
OF
PAR RUN
S
006.0
OF
PROG RUN
PASSWORD
D
TRG
T1
OK
OK
RES
X
S
000.0
OF
S
006.0
OF
Enter into PARAMETERS set mode.
Retain previous settings and come out of set mode.
PROGRAM
D
TRG
T1
OK
RUN
RES
X
S
000.0
OF
PARAMETERS
S
006.0
OF
UTILITIES
EDIT
ESC
SAVE & EXIT
EXIT
PASSWORD
D
TRG
T1
OK
OK
RES
X
S
000.0
OF
S
006.0
OF
ESC
9
PAUSE
ESC
STOP
PAR RUN
PROG RUN
SAVING DATA
. . . WAIT
EDIT
SAVE & EXIT
EXIT