Cisco NCS 5500 Series Руководство по подключению - Страница 6

Просмотреть онлайн или скачать pdf Руководство по подключению для Сетевой маршрутизатор Cisco NCS 5500 Series. Cisco NCS 5500 Series 24 страницы. Connect router to the network
Также для Cisco NCS 5500 Series: Руководство по конфигурации (19 страниц), Руководство (25 страниц)

Cisco NCS 5500 Series Руководство по подключению

Connect to the Management Ethernet Port

• Minimizes or avoids repeating characters (such as "aaa")
• Does not contain recognizable words from the dictionary
• Does not contain proper names
• Contains both uppercase and lowercase characters
• Contains both numbers and letters
Clear text passwords cannot include the dollar sign ($) special character.
Note
If a password is trivial (such as a short, easy-to-decipher password), the software rejects the password
Tip
configuration. Be sure to configure a strong password as described by the guidelines in this step. Passwords
are case sensitive.
If you enter a strong password, the software asks you to confirm the password.
Step 4
Reenter the password.
When you enter the same password, the software accepts the password .
Step 5
Enter the IP address for the management interface.
Step 6
Enter a network mask for the management interface.
Step 7
The software asks whether you want to edit the configuration. Enter no to not edit the configuration.
Step 8
The software asks whether you want to save the configuration. Enter yes to save the configuration.
Connect to the Management Ethernet Port
The management Ethernet port provides out-of-band management, which enables you to use the command-line
interface (CLI) to manage the router by its IP address. This port uses a 10/100/1000 Ethernet connection with
an RJ-45 interface.
Note
To prevent an IP address conflict, do not connect the management Ethernet port until the initial configuration
is complete.
To connect cables to the system management port, attach Category 5 cables directly to the RJ-45 receptacle
on the management Ethernet port.
Connect Router to the Network
6
Connect Router to the Network