Cisco Nexus 9000 Series Краткое руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сетевой маршрутизатор Cisco Nexus 9000 Series. Cisco Nexus 9000 Series 14 страниц. Switch chassis
Также для Cisco Nexus 9000 Series: Руководство по быстрому запуску конфигурации (6 страниц), Руководство по конфигурации (32 страниц), Руководство по конфигурации (32 страниц), Руководство (30 страниц), Руководство по установке (12 страниц), Установка (8 страниц), Руководство (16 страниц)

Installing the Chassis

Chassis

N9K-C93180YC-FX3S

N9K-C93600CD-GX

Note

Before you begin

• Verify that your shipment is complete.

• Install your rack in a secure location.

Insert the airflow sleeve into the rack and attach it as follows:

a) Holding the airflow sleeve (N9K-AIRFLOW-SLV) with both hands, position it in front of the fan side of the chassis.

b) Holding the airflow sleeve level, insert screws (12-24 or 10-32, depending on the rack type) in each of the two front

rack-mount flanges (using a total of two screws) and into the cage nuts or threaded holes in the vertical rack-mounting

rails (see the following figure).

c) Tighten the 10-32 screws to 20 in-lb (2.26 N·m) or tighten the 12-24 screws to 30 in-lb (3.39 N·m).

Grounding the Chassis

The switch chassis is automatically grounded when you properly install the switch in a grounded rack with

metal-to-metal connections between the switch and rack.

You supply the screws to mount the airflow sleeve.

Minimum Rack Depth

672.49 mm

824.80 mm

Grounding the Chassis

Maximum Rack Depth

784.25 mm

916.60 mm

Installing the Chassis