CabanaCoast CB-1242 Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Открытый камин CabanaCoast CB-1242. CabanaCoast CB-1242 19 страниц. Fire natural gas

Gas Setup for Natural Gas (Conversion kit required)

With burner in place in CabanaCoast® fire pit ta-

ble or other installation location and proper

sized orifice inserted in burner neck (see chart

on p.4 for natural gas orifice sizing), adjust air

shutter to a closed position (as shown at right,

no light visible through the shutter) by loosening

the small screw on the air shutter and rotating it

to a closed position and re-tightening screw.

Locate the included metal flex-line hose and

thread one end onto orifice and tighten securely

with two wrenches.

At this point if you are connected to natural gas

using a valve assembly such as The CabanaCoast® valve

kit, proceed to step 3a.



3a. Attach the free end of flex hose to the top

outgoing) flare fitting of control valve and tight-

enfully with two wrenches. Plumb incoming nat-

ural gas to the incoming side of the valve using a

3/8" flare nut. It is strongly recommended that a

manual shutoff valve is placed in the natural gas

line before it reaches the fire pit's control valve.

CabanaCoast® fire pit Control panel kit

CHECK ENTIRE SYSTEM FOR LEAKS BEFORE OPERATING