Epson V11H180020-N - PowerLite Home 20 Руководство пользователя - Страница 32
Просмотреть онлайн или скачать pdf Руководство пользователя для Проектор Epson V11H180020-N - PowerLite Home 20. Epson V11H180020-N - PowerLite Home 20 50 страниц. Epson esc/vp21 modem: users guide
Также для Epson V11H180020-N - PowerLite Home 20: Руководство по быстрой настройке (7 страниц), Руководство пользователя (1 страниц)
Печатать страницу
The
warning light is flashing orange.
High-speed cooling is in process. If the projector gets too hot again, projection stops
automatically. Make sure there is plenty of space around and under the projector for
ventilation. Clean or replace the air filters if necessary (see page 26). If you are using the
projector at an altitude above 5000 feet (1500 meters), switch the
(see page 22).
The
warning light is red.
The projector is too hot and has turned itself off. Let it cool for five minutes, then turn it back
on. Make sure there is plenty of space around and under the projector for ventilation. Clean
or replace the air filters if necessary (see page 26). If you are using the projector at an altitude
above 5000 feet (1500 meters), switch the
The
warning light is flashing red at half second intervals.
The lamp needs to be replaced. See page 27.
The
warning light is flashing red at one second intervals.
The lamp cover may be loose or off. Make sure it's securely fastened. See page 28.
There is an internal problem. Unplug the projector and contact Epson. See page 38.
Solving Projector Problems
The projector doesn't turn on.
Check the P power light. If it's dark, the projector is not receiving power. Make sure the
power cord is securely attached at both ends. Check that the electrical outlet isn't
controlled by a timer, wall switch, or power strip switch, which may be interrupting the
power.
If the P power light is orange, the projector is in sleep mode. Press the P
to turn on the projector.
If the Child Lock is being used (see page 22), you have to press and hold the projector's
P
Power
however, operates normally.)
If the P power light is green and not flashing, the projector is operating normally. Make
sure the lens cover is off. Press the
the picture hasn't been turned off temporarily.
32
Problem Solving
button for at least 3 seconds to turn on the projector. (The remote control,
setting to
Fan Speed
button on the remote control to make sure
A/V Mute
setting to
Fan Speed
(see page 22).
High
button
Power
High