Epson V11H180020-N - PowerLite Home 20 Руководство пользователя - Страница 37
Просмотреть онлайн или скачать pdf Руководство пользователя для Проектор Epson V11H180020-N - PowerLite Home 20. Epson V11H180020-N - PowerLite Home 20 50 страниц. Epson esc/vp21 modem: users guide
Также для Epson V11H180020-N - PowerLite Home 20: Руководство по быстрой настройке (7 страниц), Руководство пользователя (1 страниц)
Печатать страницу
The picture is blurry.
There may be dirt on the lens. Clean the lens as described on page 25.
Make sure the lens is not fogged by condensation. If you've just moved the projector from
a cold environment, wait a couple of minutes before using it.
Adjust the focus using the focus ring. See page 13.
Make sure the projector is placed the correct distance from the screen: no closer than
2.4 feet (73 cm) and no farther than 45.7 feet (13.9 m).
Adjust the
Sharpness
If you're using the
wish to decrease the projection angle to reduce the amount of keystone correction
needed, or use the lens shift dials to position the image. See page 13.
If you're projecting from a computer, press the
you see no improvement, you may need to adjust the
The picture looks too light or too dark.
Make sure the
Setup Level
the picture may look washed-out.
Press the
Color Mode
viewing environment.
Adjust the
Brightness
Note: These settings should be adjusted separately for each video source you're using.
If the picture looks darker than it used to, you may need to replace the lamp. See page 27.
The colors on the screen don't look right.
Press the
Color Mode
viewing environment.
Adjust the following settings in the Image menu:
and
. See page 18.
Skin Tone
Note: These settings should be adjusted separately for each video source you're using.
Check the settings in the
make sure they're correct for your video equipment. See page 20.
If your video equipment is connected with component video cables, make sure all three
connectors are securely attached at both ends.
setting in the Image menu. See page 18.
adjustment, be aware that it lessens image quality. You may
Keystone
is set correctly (see page 20). If it's not, dark or black parts of
button on the remote control to select the best setting for your
and
settings in the Image menu. See page 18.
Contrast
button on the remote control to select the best setting for your
Video Signal
button on the remote control. If
Auto
Tracking
Color Saturation
and
options in the Settings menu to
Input A
and
See page 18.
Sync.
,
,
Tint
Color Temp.
Problem Solving
,
37