Cisco AIR-AP1020 - 1000 Series Lightweight Access Point Краткое руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Беспроводная точка доступа Cisco AIR-AP1020 - 1000 Series Lightweight Access Point. Cisco AIR-AP1020 - 1000 Series Lightweight Access Point 44 страницы. Aironet 1000 series ieee 802.11a/b/g lightweight access points with external antennas

Печатать страницу

Installation and Configuration

This guide provides you with the information needed to mount AP1020 and AP1030 Cisco Aironet 1000
Series 802.11a/b/g lightweight access points. Cisco Aironet 1000 Series 802.11a/b/g lightweight access
points are part of the innovative Cisco Wireless LAN Solution (Cisco WLAN Solution), and require no
manual configuration after they are mounted.
This document is written assuming that you have already performed a site survey as described in the
Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Point Deployment Guide, that Cisco
Aironet 1000 Series lightweight access point locations and mounting options have been selected, and
that you have one Cisco Aironet 1000 Series lightweight access point per indicated location.
After the site survey is done, you should have a map indicating the following:
Cisco Aironet 1000 Series lightweight access point locations.
•
•
Cisco Aironet 1000 Series lightweight access point mounting options: hanging from a ceiling, in the
ceiling plenum, projecting away from the wall, flat against the wall, or using the Ceiling-Mount
Bezel Kit.
•
Cisco Aironet 1000 Series lightweight access point power options: power supplied by the AC-to-DC
power supply orderable from the factory, or PoE from a network device or a PoE injector/hub
(usually located in a wiring closet).
Caution
Plenum-mounted Cisco Aironet 1000 Series 802.11a/b/g lightweight access points MUST BE powered
using PoE to comply with safety regulations.
If you do not have a map, make one so you can record the MAC addresses from each location and return
them to the person who is planning or managing this wireless network.
Refer to the following sections to install the Cisco Aironet 1000 Series 802.11a/b/g lightweight access
points.
Note
When mounting Cisco Aironet 1000 Series 802.11a/b/g lightweight access points, be sure to maintain a
20 cm (8 in.) separation between the Cisco Aironet 1000 Series 802.11a/b/g lightweight access points
and bystanders to comply with FCC RF exposure regulations. Refer to the
Aironet 1000 Series Lightweight Access
For more details about Cisco Aironet 1000 Series lightweight access point installations, refer to the
"Planning
AP1020/1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with External Antennas - Quick Start Guide
78-17147-01
Notes"
section at the end of this document.
Points" section for more information.
"FCC Statements for Cisco
1