Epson VP21 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Проектор Epson VP21. Epson VP21 9 страниц. Esc/vp21 command user's guide for home projectors
Также для Epson VP21: Руководство пользователя (28 страниц), Руководство пользователя (28 страниц), Руководство пользователя (9 страниц)

5.Appendix

A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending commands to the

projector..

Serial Connection (TW100,TS10,TW10,TW200,TW500,TW10H,TW200H,TW20,TW600/520/550/800,TW700,TW1000,TW2000,

TW3000/TW4000/TW5000)

• Select RS-232C at Advanced Setting of the Menu.

• Communication condition

Baud rate

Data length

Parity

Stop bit

Flow control

• Connector

• Projector input

*Theres no effect if DTR and DSR are not used.

USB Connection (TS10,TW200,TW500,TW200H,TW420)

• TS10, select USB at Advanced Setting of the Menu.

• Epson USB VCOM Driver has to be installed in your computer to use USB fpr communication.A COM port is added to your

computer, when the projector and your computer is connected by a USB cable. The added COM is listed at PORT (COM/LPT)

in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).

• Connector

ESC/VP21 Communication Manual Home

: 9600 bps

: 8 bits

: No

: 1 bit

: No

: D-sub 9pin

: Control(RS-232C)

(PC serial cable)

GND

Signal name

GND

: USB(B type)

Function

Common ground

Transmitted data

Received data

8 of 9

GND