DigitaLinx DL-HD2100 Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Удлинитель DigitaLinx DL-HD2100. DigitaLinx DL-HD2100 17 страниц. Hdbaset extender set
Также для DigitaLinx DL-HD2100: Руководство по быстрой установке (8 страниц), Руководство по быстрой установке (8 страниц)
Печатать страницу
Quick Start
1.
Connect video source to transmitter HDMI IN
2.
Connect display technology to receiver HDMI OUT
3.
Connect transmitter and receiver together with a shielded Category 6 cable
4.
Connect control (optional)
5.
Connect audio (optional)
6.
Apply power to either transmitter OR receiver to power entire circuit
Connecting a Video Source
HDMI Input (Transmitter)
Connect an HDMI source device to the HDMI input on the DL-HD2100 transmitter labeled HDMI IN using an
HDMI cable that is less than or equal to 5 meters in total length. For HDMI source devices that are further away,
an active HDMI cable may be required to complete the connection.
Connecting a Display
HDMI Output (Receiver)
Connect the display to the HDMI output on the DL-HD2100 receiver labeled HDMI OUT using an HDMI cable
that is less than or equal to 5 meters in length. It is recommended to keep the DL-HD2100 receiver near
the display input as it is not recommended that an active HDMI cable be used on the HDMI output on the
DL-HD2100 receiver.
Installation Instructions
DL-HD2100 Owners Manual
7