Epson VS250 Быстрая настройка - Страница 2

Просмотреть онлайн или скачать pdf Быстрая настройка для Проектор Epson VS250. Epson VS250 4 страницы.

Печатать страницу

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
VS250: To reduce or enlarge the image, press the T (reduce) or
W (enlarge) buttons on the projector.
VS350/VS355: To reduce or enlarge the image, turn the zoom ring.
VS250
VS350
VS355
4
To sharpen the image, turn the focus ring.
VS250
VS350
VS355
5
If your image looks like
or
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can't
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
VS250
VS350
VS355
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct it.
, you may have placed the projector
or
,
or
button on the projector to

Using the remote control

Install the batteries as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online User's Guide.

Troubleshooting

If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•
Make sure the Status light on the projector is blue and not flashing, and
the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control to
switch to the correct image source, if necessary.
•
Press the Home button on the projector or remote control to verify the
source input and settings.
•
On Windows
7 or later, hold down the Windows key and press P at the
®
same time, then click Duplicate.
•
If you're using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you're using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
Choose which source
to display
Navigate projector
menus
Access the Home
screen
. You may have to hold down the