DigitaLinx DL-HDM88A-H2 Руководство по быстрой установке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Переключатель DigitaLinx DL-HDM88A-H2. DigitaLinx DL-HDM88A-H2 8 страниц. Crestron home driver
Также для DigitaLinx DL-HDM88A-H2: Установка драйверов (3 страниц)
Печатать страницу
DL-HDM88A-H2 Quick Guide
Cabling Wiring Requirements
Ethernet Control
The DL-HDM88A-H2 may be controlled via Ethernet through a web browser interface.
1
8
TIA/EIA-568B
P n 1
Or n e/Wh te
P n 2
P n 3
P n 4
P n 5
P n 6
P n 7
Brown/Wh te
P n 8
RS232 Control
The RS232 connection on the matrix is female DB9. User can use a USB to UART cable or a direct serial
cable for matrix control. See below for control system configuration.
•
9600 baud
•
8 Data Bits
•
1 Stop Bit
•
Parity = none
6
The TCP/IP port requires a standard straight-through
Category 5 or greater cable with the TIA/EIA-568B crimp
pattern for optimal operation.
Or n e
Green/Wh te
Blue
The default settings for the TCP/IP port are:
Blue/Wh te
Green
IP address: 192.168.0.178
Brown
Connect the Ethernet cable between to the matrix and a
router with a straight-through cable or between the matrix
and a computer with a crossover cable.