DigitaLinx DL-UHDILC Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для Переключатель DigitaLinx DL-UHDILC. DigitaLinx DL-UHDILC 17 страниц.
Также для DigitaLinx DL-UHDILC: Руководство по быстрой установке (5 страниц)
Печатать страницуDL-UHDILC Owners Manual
DL-UHDILC Configuration Software Usage
Overview
The DL-UHDILC Configuration Software allows you to load ON and OFF serial commands into the RS232 control
port of the DL-UHDILC so the commands can be sent to a connected display or projector to automate power.
The software also gives you the ability to change relay modes from latching (default) to momentary on the two
integrated relay ports.
Downloading DL-UHDILC Configuration Software
The DL-UHDILC configuration tool can be found online on the DL-UHDILC product page under the SOFTWARE tab
at www.libav.com. Download the zip file and extract all files, then run the tool on a Windows PC that will be used
to configure the DL-UHDILC.
Making a PC Connection
To connect a PC to the DL-UHDILC RS232 port, a DB9 (RS232) to USB adapter is required. The Liberty 120-DA-0004
RS232 to USB adapter can be used for this.
Once the RS232 to USB adapter has been installed on the PC, connect the DB9 connector on the USB adapter to
the DB9 connector of the DB9 to phoenix adapter that came in the DL-UHDILC box. Then connect the phoenix
connector of the supplied DB9 adapter to the DL-UHDILC RS232 port.
Running Configuration Software
Open the configuration software by double clicking the configuration tool icon. The following screen will appear
11