Cisco Aironet 2802E Руководство по началу работы - Страница 14

Просмотреть онлайн или скачать pdf Руководство по началу работы для Беспроводная точка доступа Cisco Aironet 2802E. Cisco Aironet 2802E 50 страниц.

Preparing the AP for Installation

Before you mount and deploy your access point, we recommend that you perform a site survey (or use

the site planning tool) to determine the best location to install your access point.

You should have the following information about your wireless network available:

• Access point locations.

• Access point mounting options: below a suspended ceiling, on a flat horizontal surface, or on a

desktop.

You can mount the access point above a suspended ceiling but you must purchase

Note

additional mounting hardware: See

on page 19

• Access point power options: PoE+ or Cisco Power Injector AIR-PWRINJ6=.

Cisco recommends that you make a site map showing access point locations so that you can record the

device MAC addresses from each location and return them to the person who is planning or managing

your wireless network.

Installing the access point involves these operations:

Step 1

Step 3

Preparing the AP for Installation, page 14

for additional information.

"Mounting and Grounding the Access Point" section

(optional)