Epson 3880 - Stylus Pro Color Inkjet Printer Руководство по работе с сетью - Страница 18

Просмотреть онлайн или скачать pdf Руководство по работе с сетью для Принтер "все в одном Epson 3880 - Stylus Pro Color Inkjet Printer. Epson 3880 - Stylus Pro Color Inkjet Printer 39 страниц. Printer
Также для Epson 3880 - Stylus Pro Color Inkjet Printer: Брошюра (3 страниц), Технические характеристики (2 страниц), Брошюра и технические характеристики (8 страниц), Начните здесь (2 страниц), Начните здесь Руководство (6 страниц), Ограниченная гарантия (12 страниц), Руководство по управлению цветом (47 страниц), Брошюра и технические характеристики (8 страниц), Руководство по работе с сетью (38 страниц), Краткое руководство по эксплуатации (2 страниц)

7. Press r, then press u or d to choose one of the following IP configuration

settings:

❏ Choose AUTO if your network uses a DHCP server to provide IP

addresses automatically. The printer's IP address will be obtained from

the DHCP server whenever the printer is reset or turned on.

❏ Choose PANEL if you would like to set the printer's IP settings manually.

❏ Choose PING to set the printer's IP address using the arp command.

The IP address is set when the printer is turned off and then back on.

8. Press

. An asterisk ( ) appears next to the setting you selected.

9. Press l to go back, then do one of the following:

❏ If you selected AUTO as the IP address setting, press the

Reset button to exit the printer menu. Then continue with step 14.

❏ If you selected PANEL as the IP address setting, continue with step 10.

❏ If you selected PING as the IP address setting, press the

Reset button to exit the printer menu. Print a network status sheet to

determine the printer's MAC address (see "Printing a Network Status

Sheet" on page 19). Then use the arp command to set the IP address

from a computer on the same segment of your network as the printer.

Type the arp command on the command line using this format (where

X is the IP address you want to assign and Y is the MAC address):

arp -s XXX.XXX.XXX.XXX YY-YY-YY-YY-YY-YY

After typing the command, continue with step 14.

10. Press d to highlight IP,SM,DG SETTING, then press r. The LCD displays

the IP address.

11. Press u or d to change each octet value, then press r to select the next

octet. When you have changed the value of the last octet, press r. The

LCD displays the subnet mask.

12. Press u or d to change each octet value, then press r to select the next

octet. When you have changed the value of the last octet, press r. The

LCD displays the default gateway.

Setting Up Your System for Network Printing

Cancel/