Epson 4000 - Stylus Pro Color Inkjet Printer Краткое справочное руководство - Страница 4

Просмотреть онлайн или скачать pdf Краткое справочное руководство для Принтер "все в одном Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 11 страниц. Print engine
Также для Epson 4000 - Stylus Pro Color Inkjet Printer: Брошюра и технические характеристики (4 страниц), Справочное руководство по продукту (38 страниц), Информация о продукте (13 страниц), Начните здесь Руководство (6 страниц), Бюллетень поддержки продуктов (17 страниц), Важная информация (2 страниц), Ограниченная гарантия (12 страниц), Брошюра и технические характеристики (12 страниц), Брошюра и технические характеристики (6 страниц), Руководство по настройке (16 страниц)

Печатать страницу

Epson 4000 - Stylus Pro Color Inkjet Printer Краткое справочное руководство

Checking and Aligning the Print Head

If your prints look grainy or blurry, or you see

misregistration or "ghosting," you need to align the print

head. First, you need to make sure the nozzles are clean.

Running a Nozzle Check and

Auto Cleaning

You can turn on Auto Cleaning at the same time you

check the print head nozzles. The printer prints the check

pattern, reads it, and automatically runs a cleaning cycle

if necessary. First, make sure paper is loaded in the tray.

Go to the Utilities in your EPSON printer driver.

In Mac OS X, you'll find it in the Epson Printer

Utility in the Applications folder.

Click the Nozzle Check icon.

Click Auto and follow the instructions on the

screen.

Note:

You can also run a cleaning cycle by

pressing the Menu button and holding it for

more than 3 seconds.

Aligning the Print Head

After you check the print head and clean it if necessary,

follow these steps to align the print head:

Make sure the printer is turned on. Then load

EPSON Enhanced Matte or Premium Luster

Photo Paper.

Press the Menu button.

Press the

button to display HEAD

ALIGNMENT. Then press Menu. You see

PAPER THKNS.

Press the Menu button again so that *STD

appears on the display. This is the correct

thickness setting for most EPSON papers,

including Enhanced Matte paper.

Press the Menu button to register the

value, then press the

PAPER THKNS again.

Press the

button to display ALIGNMENT.

Press the Menu button to display AUTO,

then press Menu again. You see UNI-D

(uni-directional). This is the type of

alignment to start with.

Press the Menu button again to start the

alignment process. Head alignment takes about

7 minutes.

Caution:

Make sure you don't open the top cover or

turn off the printer during the alignment process.

When the uni-directional alignment is finished,

press the

button until you see BI-D BLK .

Then press the Menu button again to start the

bi-directional black alignment.

When the bi-directional black alignment is

finished, press the

BI-D ALL. Then press the Menu button again.

When the final alignment is finished, press the

Pause button.

button to display

button until you see