Cisco Aironet AP2802I Руководство по началу работы - Страница 8
Просмотреть онлайн или скачать pdf Руководство по началу работы для Беспроводная точка доступа Cisco Aironet AP2802I. Cisco Aironet AP2802I 50 страниц.
Печатать страницуThe fasteners you use to mount an access point on a ceiling must be capable of
Caution
maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4 indented holes
on the mounting bracket.
This product and all interconnected equipment must be installed indoors within the same
Caution
building, including the associated LAN connections as defined by Environment A of the
IEEE 802.af Standard.
The access point is suitable for use in environmental air space in accordance with section
Note
300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the
Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power
injector in air handling spaces.
Use only with listed ITE equipment.
Note
4
Unpacking
To unpack the access point, follow these steps:
Unpack and remove the access point and the accessory kit from the shipping box.
Step 1
Return any packing material to the shipping container and save it for future use.
Step 2
Verify that you have received the items listed below. If any item is missing or damaged, contact
Step 3
your Cisco representative or reseller for instructions.
The access point
–
Mounting bracket (selected when you ordered the access point)
–
Adjustable ceiling-rail clip (selected when you ordered the access point)
–
8