Cisco ASR1006 - ASR 1006 Modular Expansion Base Руководство по установке оборудования - Страница 43
Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Беспроводная точка доступа Cisco ASR1006 - ASR 1006 Modular Expansion Base. Cisco ASR1006 - ASR 1006 Modular Expansion Base 47 страниц. Lightweight access points
Также для Cisco ASR1006 - ASR 1006 Modular Expansion Base: Руководство по развертыванию (40 страниц)
Печатать страницу
After the SPA is properly seated, fasten the SPA in place with the captive installation screws on either side of the SPA.
Step 4
The shared port adapter ships installed. These instructions are provided for future use. Cabling information is included
Note
with the specific shared port adapter documentation.
Step 1
Attach an ESD wrist strap between you and an unpainted chassis surface.
Step 2
If attached, remove any cables from the SPA.
Before removing any shared port adapter, shut down the interface so that there is no traffic running through the shared
Step 3
port adapter when it is removed.
Removing a shared port adapter while traffic is flowing through the ports can cause system disruption.
Note
Step 4
Remove the shared port adapter from the chassis slot. Unfasten the captive installation screws on either side of the SPA.
Step 5
Grasp the handle and pull the shared port adapter or blank shared port adapter from the router.
Step 6
Locate the shared port adapter slot guides inside the Cisco ASR 1006 Router. They are near the top, and are recessed
about one-half inch.
The shared port adapter must slide into the slot guides under the chassis lid. Do not allow the shared port adapter
Caution
components to come in contact with the system board or the shared port adapter could be damaged.
Carefully slide the shared port adapter into the shared port adapter slot and seat it. When installed, the shared port
Step 7
adapter input/output panel should be flush with the face of the router.
Reconnect any cables, including the shared port adapter and power cables, and place the cables through any
Step 8
cable-management bracket.
Note
If the shared port adapter fails to come up, reseat or reinsert the shared port adapter: do not use excessive force.
Power on the router by turning the power switch to the On(|) position.
Step 9
For detailed Cisco SPA and SIP information, see
Note
Hardware Installation
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the
monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your
desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this
URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
Guide.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA
43