Epson Artisan 700 Series Faq

KB / FAQ

Epson PX700 - PX730WD

Note: This guide also covers the following Epson printer models:

PX700W, PX710W, PX720WD, PX730WD

PX800FW, PX810FW, PX820FWD, PX830FWD

TX700, TX710W, TX720WD

TX800FW, TX810FW, TX820FWD

Artisan 700, 710, 725, 735

Artisan 800, 810, 835, 837

This guide is primarily aimed at OctoInkjet customers who have purchased a Solo-X waste kit (released May

2011) although customers with the earlier Solo+ can still apply some of the steps to their kit (but without a

part to act as the strain relief).

Note: This guide is copyright of OctoInkjet. It required 12 hours, the purchase of three printers (to check it

was all correct) and hard work to produce.

Please, if you see my work reproduced elsewhere, please report it to me, eBay (if provided by one of the

sellers there) or the appropriate authority so it can be removed. Competitors do not do the hard work, barely

understand the product and will not provide this level of documentation or support themselves so please do

not reward them by buying their kits.

OK... here are the step by step instructions fitting a Solo-X waste kit to a compatible printer.

1/4