Cisco GR10-HW Руководство - Страница 10

Просмотреть онлайн или скачать pdf Руководство для Беспроводная точка доступа Cisco GR10-HW. Cisco GR10-HW 15 страниц.

Then adjust the GR10-HW to guide the GR10-HW's bottom slot into the cradle's bottom

tab until it clicks into place. Once in place, the GR10-HW should be secured to the cradle by

using one of the included screws in the cradle's bottom tab.

To release the GR10-HW from the mount cradle, first remove the security screw that secures

the GR10-HW to the cradle's bottom tab. While holding the GR10-HW with one hand, press

the cradle's bottom tab upwards, releasing the GR10-HW from the bottom of the cradle.

Then remove the GR10-HW from the cradle's top tab.

Desk or Shelf Mount

The GR10-HW can be placed on a desk or shelf resting on the non-scratch rubber feet. The

mount cradle is not necessary for a desk or shelf installation.

Secure the GR10-HW

Depending on your mounting environment, you may want to secure the GR10-HW to its

mount location. Your GR10-HW can be secured in several ways. If the GR10-HW has been

installed using the mount cradle, it should be secured via security screw (Torx security

screws are included) and/or Kensington lock. If the mount cradle was not used, the GR10-HW

can still be secured using a Kensington lock.

Power the GR10-HW

If mounting to an electrical junction box, feed the Ethernet cable through the cable access

hole in the mount cradle. If mounting to a wall or ceiling, the Ethernet cable will feed from

behind the GR10-HW. The

different powering options and their unique characteristics.

Verify Device Functionality and Test Network Coverage

1. Check LEDs

a. The Power LED should be solid green (or blue, if clients are connected). If it is

ﬂashing blue, the ﬁrmware is automatically upgrading and the LED should turn

green when the upgrade is completed (normally within a few minutes). See

the

"LED

b. Note: Your GR10-HW must have an active route to the Internet to check and

upgrade its ﬁrmware.

2. Verify access point connectivity

"Power Source

Options" section of this document lists the

Indicators" section for more details. .