Epson C11CA20201 Краткое руководство - Страница 31

Просмотреть онлайн или скачать pdf Краткое руководство для Принтер "все в одном Epson C11CA20201. Epson C11CA20201 48 страниц. Basic copying, printing and scanning maintaining your all-in-one solving problems

Печатать страницу

Cleaning the Print Head

If print quality has declined and the nozzle check pattern indicates clogged

nozzles, you can clean the print head. Print head cleaning uses ink, so clean it only

if necessary.

Note:

You cannot clean the print head if an ink cartridge is expended or low. You must replace

the cartridge first (see page 33).

1. Load letter-size paper in the sheet feeder

(see page 5).

2. Press

Setup

3. Press l or r to select

4. Press d to select

5. Press x

Start

Cleaning takes approximately one minute. When it's finished, you see a

message on the display screen.

Caution:

Never turn off the NX400 Series during head cleaning or you may damage it.

6. Press x

Start

the print head is clean.

7. If there are still gaps or lines, or the test patterns are faint, run another

cleaning cycle and check the nozzles again.

Note:

If you don't see any improvement after cleaning the print head four times, turn off your

NX400 Series and wait at least six hours to let any dried ink soften. Then try cleaning

the print head again. If quality does not improve, one of the ink cartridges may need to

be replaced. If that doesn't help, contact Epson as described on page 40.

If you do not use your NX400 Series often, it is a good idea to print a few pages at least

once a month to maintain good print quality.

Maintenance

Head Cleaning

to run a nozzle check (as described on page 30) to verify that

and press

Cleaning the Print Head