Epson C11CA82211 Краткое руководство - Страница 21

Просмотреть онлайн или скачать pdf Краткое руководство для Принтер "все в одном Epson C11CA82211. Epson C11CA82211 40 страниц. Freescale semiconductor all in one printer user manual

Печатать страницу

Cleaning takes approximately one minute.

throughout the cleaning cycle and stays on green when the cleaning cycle is

finished.

Caution:

Never turn off the printer during head cleaning or you may damage it.

4. Run a nozzle check (as described on page 19) to verify that the print head is

clean.

5. If there are still gaps or lines, or the test patterns are faint, run another

cleaning cycle and check the nozzles again.

Note:

If you don't see any improvement after cleaning the print head four times, turn off the

printer and wait at least six hours to let any dried ink soften. Then try cleaning the print

head again. If quality does not improve, one of the ink cartridges may need to be

replaced. If that doesn't help, contact Epson as described on page 32.

If you do not use your Epson printer often, it is a good idea to print a few pages at least

once a month to maintain good print quality.

Checking Ink Levels

Your printer and its software will let you know when an ink cartridge is low or

expended.

If the ink is low, the

until the cartridge needs replacement.

If a cartridge is expended, the

the cartridge to be able to print.

Note:

You cannot print or copy when an ink cartridge is expended even if the other cartridges

are not expended. Replace any expended cartridges before printing or copying.

You can check ink cartridge levels using your printer software:

■

Windows: Double-click the

your screen (the taskbar).

■

Macintosh: Open the

EPSON Printer Utility4

EPSON StatusMonitor

error and

ink lights flash. You can continue printing

error and

printer icon in the bottom right corner of

folder on your hard drive, then open the

Applications

. Select your Epson printer and click

The P Power light

ink lights stay on. You must replace

Checking Ink Levels

flashes

, then select