Cisco WAP361 Краткое руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Беспроводная точка доступа Cisco WAP361. Cisco WAP361 17 страниц. Reboot and reset to factory default settings
Также для Cisco WAP361: Руководство (4 страниц)
Печатать страницу
Getting Started with the Configuration
6
To configure the Cisco WAP361, follow these steps to access the the web-
based Configuration Utility and then the Setup Wizard from your computer:
Connect the Cisco WAP361 to the same network (IP subnet) as your
S
1
TEP
computer. The factory default IP address configuration of the Cisco
WAP361 is DHCP. Make sure that your DHCP server is running and
can be reached.
See
"Incorrect IP Address"
you do not have a DHCP server.
Locate the IP address of the Cisco WAP361.
S
2
TEP
a.
The Cisco WAP361 can be accessed and managed by Cisco
network tools and services including the Cisco FindIT Network
Discovery Utility that enables you to automatically discover all
supported Cisco devices in the same local network segment
as your computer. You can get a snapshot view of each device
or launch the product configuration utility to view and
configure the settings. For more information, see
www.cisco.com/go/findit.
b. The Cisco WAP361 is Bonjour-enabled and automatically
broadcasts its services and listens for services being
advertised by other Bonjour-enabled devices. If you have a
Bonjour-enabled browser, such as Microsoft Internet Explorer
with a Bonjour plug-in, or the Apple Mac Safari browser, you
can find the Cisco WAP361 on your local network without
knowing its IP address.
You can download the complete Bonjour for Microsoft Internet
Explorer browser from Apple's website by visiting:
http://www.apple.com/bonjour/
c.
Locate the IP address assigned by your DHCP server by
accessing your router or DHCP server. See your DHCP server
instructions for more information.
Launch a web browser, such as Microsoft Internet Explorer.
S
3
TEP
In the address bar, enter the default DHCP address and press the
S
4
TEP
Enter key.
Enter the default user name of cisco and password of cisco in the
S
5
TEP
Username and Password fields.
Click Log In. The Wireless Access Point Setup Wizard appears.
S
6
TEP
10
for troubleshooting information, or if
Cisco WAP361 Quick Start Guide