Epson CX6600 - Stylus Photo Printer Информационный справочник - Страница 3

Просмотреть онлайн или скачать pdf Информационный справочник для Принтер "все в одном Epson CX6600 - Stylus Photo Printer. Epson CX6600 - Stylus Photo Printer 4 страницы. Epson scan icm updater v1.20 (psb.2008.07.001)
Также для Epson CX6600 - Stylus Photo Printer: Начните здесь Руководство (8 страниц), Краткое руководство (48 страниц), Начните здесь Руководство (8 страниц), Руководство (14 страниц), Руководство по обновлению (2 страниц), Руководство по настройке (2 страниц), Обновление (1 страниц), Краткое руководство (47 страниц), Руководство по эксплуатации (50 страниц)

Печатать страницу

Epson CX6600 - Stylus Photo Printer Информационный справочник

X5470

Photo Matte Paper / Normal

Canon

This manufacturer's range of printers will typically give you the blackest artwork by

changing the settings to:

Paper to 'Other Speciality Papers'

Quality to 'Best'

and Ink to 'Black and White'.

Ink Jet

Model

Optimal print setting

Smartbase

Set to Paper and normal. Do not print on

MP3605

transparency.

Pixma 1200

Set to Paper to transparency. In Printing

Preferences set Colour/Intensity to Manual and

increase intensity to maximum.

Common problems

Artwork has white flecks in it:

If you have white flecks in the black the light will get through and you will not get

enough depth to your stamp. White flecks are either because you didn't enhance

the Brightness and Contrast on a scanned or downloaded image or because your

printer has been told to print on the wrong media (say paper instead of

transparency).

Artwork has white dotted lines through it:

One of your ink jet heads is blocked. Go into the properties and clean your heads.

Artwork has a red or blue hue to it:

Your artwork may have been printed using the colour or Cyan/Magenta/Yellow

cartridge. Although this may look black it will not work. You can see your black

artwork will have a blue or red hue when examined against the light.

Laser Printers

Handle imageblack film by the edges only and store in the envelope when not in

use. Insert film either way round into printer.

In Microsoft Windows click Start and Printers and Faxes.

Select your laser printer, right-click and open Properties from the drop down

menu. If you have the option, increase the ink density to maximum.

Set your printer paper settings to Vellum, or if it does not provide that option use

Transparency.

Increase the resolution to maximum and press Print. Do not touch the printed

surface until fully dry.

Examine your negative by holding it up against the light, the black areas should

not allow light through.

Low resolution printers (mostly ones with 600x600

Black

Rating