Epson ET-3843 Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Принтер "все в одном Epson ET-3843. Epson ET-3843 4 страницы.
Печатать страницу
2
Unpack the black (BK) ink bottle. Hold the ink bottle upright
and slowly turn the bottle cap to remove it.
Do not shake or squeeze the ink bottle. Do not touch the
Caution:
top of the ink bottle after its cap is removed.
3
Insert the ink bottle into the filling port.
Do not force the bottle into position; each bottle is keyed for
Note:
each color.
4
Wait for the ink to fill the tank.
Do not squeeze the bottle or
allow it to contact any other
surface.
Ink flows into the tank and
Note:
stops automatically when the ink
tank is filled to the upper line. If
ink does not flow from the bottle,
lift and reinsert the bottle.
5
When the ink tank is full, remove the ink bottle and securely
close it with the bottle cap. If any ink remains in the bottle,
close the bottle and store it for later use.
Do not leave the ink bottle inserted; otherwise the bottle may
Note:
be damaged or ink may leak.
6
Securely close the black ink tank cap.
7
Repeat the previous steps for the other colors.
8
Close the ink tank cover, then close the scanner unit.
9
Raise the control panel, then press the
turn on the product. The
If an error code appears, turn off the product and check
Note:
that no protective material has been left inside the product.
10
Select your language.
You can change this setting later using the product's
Note:
control panel. For more information, see the online User's Guide.
11
When an Epson Smart Panel message appears on the
LCD screen, select the option to continue setup without
the app.
12
When the message to see the Start Here sheet appears
on the LCD screen, press and hold the
5 seconds.
13
Follow the on-screen instructions to start ink charging. Ink
charging takes about 10 minutes.
When the
power light stops flashing, ink charging is
Note:
complete. Once initial setup of the printer is complete, you can
top off the ink tanks with any remaining ink. See the online User's
Guide for instructions.
Do not unplug or turn off the product, or raise the
Caution:
scanner unit while the product is charging or you'll waste ink.
After some ink is used for charging, the rest is available for
Note:
printing.
14
Press the OK button to proceed with initial setup.
15
Follow the on-screen instructions to adjust the print
quality of your product.
Note:
• You need to load paper before you can adjust the print quality.
See "Load paper" on this sheet for details.
• Select Adjust Later if you want to adjust the print quality later.
For more information, see the online User's Guide.
After setup, periodically inspect the ink levels to ensure they
Caution:
do not fall below the
lowest lines on the tanks. Prolonged use when
ink is below the lowest line could damage the product. See the online
User's Guide for refilling instructions.
power button to
power light flashes.
help button for