Cisco Cisco Access Registrar 4.2 Настройка параметров сети - Страница 15
Просмотреть онлайн или скачать pdf Настройка параметров сети для Конференц-система Cisco Cisco Access Registrar 4.2. Cisco Cisco Access Registrar 4.2 34 страницы. Telepresence conference system
Также для Cisco Cisco Access Registrar 4.2: Руководство пользователя (44 страниц), Руководство по началу работы (46 страниц)
Печатать страницу
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Disabling DHCP
Note
Using the Phone Configuration Web Page
Step 1
Step 2
Step 3
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
If you do not use DHCP in your network, use this procedure to disable DHCP
before manually assigning IP addresses to Cisco Unified IP Phones.
Procedures involved in configuring IP settings or TFTP options cannot be
completed when DHCP is enabled in your network.
To disable DHCP for the Cisco Unified IP Phone, follow these steps:
Procedure
Display the Phone Configuration web page.
For instructions, see the
Configuration Web Page" section on page
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
To disable DHCP, enter 0 in the DHCP field and click Apply.
"Accessing Network Settings through a Phone
4-2.
Modifying DHCP Settings
4-15