Cisco TelePresence Profile 55 Dual Монтажный лист

Просмотреть онлайн или скачать pdf Монтажный лист для Конференц-система Cisco TelePresence Profile 55 Dual. Cisco TelePresence Profile 55 Dual 2 страницы. Telepresence ex, mx, quick set c20, codec c, sx20 quick set, profile series video systems
Также для Cisco TelePresence Profile 55 Dual: Руководство по началу работы (42 страниц)

Печатать страницу

Installing Cisco TelePresence System Profile 55" Dual

the Profile 55" dual deliVery contains:

Monitor box:

Monitor back cover box:

• Two monitors and

• Monitor back cover

speaker grilles

• Two M4×15 screws for the back

cover

Bottom module column

• Monitor brackets

Camera

• M4×25 and M4×8 screws for the

Touch 8" interface device

monitor brackets

Foot module box:

• Four M8×15 screws to fasten the

• Foot module (stand-alone or wall

monitors to the column

mount)

Accessories box:

• Six M8×45 screws

• Cables

• Two wall mount brackets and four

• Microphones, 4 pcs

M6×10 screws (for wall mount only)

• Remote control and 4 AAA

• Level adjustment tool

batteries

• Gloves, 2 pairs

• Cleaning cloth

• Allen key, screwdriver

content overview

Remove the outer cover and locate the different boxes as illustrated below.

heaVy

caution

Bottom module column

Monitor back cover and monitor brackets

heaVy

caution

Foot module

Touch controller

Accessories box

Camera

Rev. Date

Prep.

Checked Change

Telecom AS

120601 rev.

Packaging Kit Profile 52" Dual

3D CAD model file 120601 rev. 03 is master

The monitors come in a separate box. The monitor box contains monitors and

heaVy

speaker grilles for the monitors. Remove the lid and locate the left and right

caution

monitors and the speaker grilles.

Right and left monitor

Left monitor

Right monitor

lifting the column out of the package. mounting the column to the foot module to complete the bottom module

heaVy

Grab here when

caution

lifting the column.

Front

Rev. Date

Sheet 1 of 1

Processes

Tolerances

Specification:

Material

Surface treatment

117325 rev.

Type:

European

TANDBERG Aquarius dual 52"

Manufacturer:

projection

Type number:

3D CAD model file 117325 rev. 00D is master

Thickness:

Unit:

Dimensions without paint or finish

when you haVe a wall mount foot module:

Color:

Sheet size:

All materials, finishes, and proccesses

Surface:

must comply with the RoHS directives

Glossiness:

Scale:

1:8

Flame class:

Part weight:

71743g

Flame class requirement: -

UL reference:

mounting the column to the foot module and fastening it to the wall

Mount the column to the wall mount foot module, similar to step 2.

Fasten the wall brackets to the bottom module with the four M6×10

screws. Use the Allen key.

Place the bottom module by the wall, mark where to fasten the

bracket and move the bottom module away.

Add the suitable fixing device for the screws in the wall, and fasten

the bottom module.

leVelling adJustment

Make sure the unit is stable.

Place the level adjustment tool on the

foot wheel under the foot module for

height adjustment.

Seen from above, turn clockwise to

adjust the height up. Use the opposite

side of the tool and turn counterclockwise

to adjust down.

Precautions

Please follow the steps in this installation guide when

unpacking and assembling Profile 55" Dual.

unPacking the system at the destination

It is highly recommend to start the unpacking and assembling

of Profile 55" Dual at the place where it is to be used.

note:

If it is not possible to bring the complete delivery to

the room where Profile 55" Dual is to be used, then unpack

and bring the smaller units to the destination.

• The monitor box requires two (2) persons to lift (55 kg /

121 lb).

• The bottom module column requires two (2) persons to lift

(40 kg / 88 lb).

Column

• The foot module requires two (2) persons to lift

(stand-alone: 35 kg / 77 lb; wall mount: 20 kg / 44 lb).

Stand-alone

foot module

Move the foot module to its

permanent location, and place the

column on the foot module.

Open the rear door. Unscrew the two

thumb nuts and remove the door stop

bracket.

Carefully open the rear door

completely.

Rear side

Prep.

Checked Change

Specification:

Material

Surface treatment

Sheet 1 of 1

Processes

Tolerances

Type:

European

Manufacturer:

projection

Type number:

Thickness:

Unit:

Dimensions without paint or finish

Color:

Sheet size:

All materials, finishes, and proccesses

Surface:

Glossiness:

Scale:

1:7

must comply with the RoHS directives

Flame class:

Part weight:

38276168g

Flame class requirement: -

UL reference:

Front

Page 1

manPower

A minimum of two (2) persons are required when installing

Profile 55" Dual.

installation near a socket-outlet

The equipment must be installed near a socket-outlet. The

socket-outlet shall be easily accessible after installation.

room guidelines

note:

The floor must be in level.

The recommended distance between the Profile 55" Dual

and the meeting room table should be minimum 1.5 m / 59 in.

Read more about room guidelines in the Video conferencing

room primer.

Fasten the column to the foot module

with three M8×45 screws on each

side as illustrated to the right.

Fasten the door stop bracket again

with the two thumb nuts.

Allen key and

six M8×45

screws

Screws to

fasten the

column

Door stop bracket

Add the suitable fixing device for the screws in the wall.

Screws to fasten the wall

bracket to the bottom module

Allen key and four

M6×10 screws

user documentation

The user documentation for this product, including

compliance and safety information, is available on the Cisco

web site.

Go to: http://www.cisco.com/go/telepresence/docs.

dimensions of the Profile 55" dual

• Height: 64.6" / 164 cm

• Width: 99.2" / 252 cm

• Depth (wall mount): 10.2" / 26 cm

• Depth (stand-alone): 17.7" / 45 cm

• Weight: 440 lb / 200 kg

Access the innermost screws through these holes.

Screws to

fasten the

column

The bottom module is viewed from the rear side.

caution

Due to the size and weight of this equipment, it is very

important that the wall mount unit is safely installed

according to the installation instructions and that the

wall is able to safely support the product. It is highly

recommended that the wall mounted system is installed

by trained personnel.

The wall