Sony 10001 Руководство по установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке для Видеокамера Sony 10001. Sony 10001 50 страниц. A/v multiplexer board, a/v demultiplexer board
Также для Sony 10001: Руководство по установке (28 страниц)

Печатать страницу

1. Setup Menu Settings

1-3. Operating Conditions

1-4. Power Supply

1-3. Operating Conditions

Good air circulation is essential to prevent internal heat build-

up. Place the unit in location with sufficient air circulation.

Do not block the ventilation holes of the cabinet and the

front and rear panels.

Operating temperature: 5dC to 40dC

Operating humidity:

25% to 80% (non-condensing)

Storage temperature:

_20dC to 60dC

Locations to avoid:

. Areas where the unit will be exposed to direct sunlight

of any other strong lights.

. Areas near heat sources.

. Dusty areas or areas subject to vibration.

. Areas with strong magnetic field.

. Areas with much electrical noise.

. Areas with much static electricity.

. Areas that is impossible to find a specified room for

installation. (Refer to "1-5. Installation Space".)

. Areas windtight.

Tilt allowance:

Within 30d (Do not slant the front

and rear of the unit more than 30d.)

Fix the unit securely to avoid slipping if the unit is not

operated at horizonal place.

1-4. Power Supply

1-4-1. Voltage and Power Requirements

This unit's power line has a switching regulator.

Be sure to operate the unit within the range of following

power voltage.

AC 100 to 240 V ± 10%

Power voltage:

Power frequency:

50 Hz or 60 Hz

Power consumption DNW-75/75P: 175 W (184 VA)

DNW-65/65P: 156 W (165 VA)

Rush current:

Power voltage 100 V IN: 10 A

Power voltage 240 V IN: 20 A

AC power supply is required a capacity which is commen-

surate with rush current.

If the capacity of the AC power supply is not enough, the

breaker of AC power of a supply side may operate or this

unit may not operate normally.

1-2

1-4-2. Power Cord

This unit does not come with a power cord.

To get a power cord, please contact your local Sony Sales

Office/Service Center.

Use the specified power cord only when connecting the

AC power.

Never use a injured power cord.

For customers in the U.S.A. and Canada:

1 Power cord 125 V 10 A (2.4 m):

2 Plug holder (Brown):

For customers in the United Kingdom:

1 Power cord 250 V 10 A (2.4 m):

2 Plug holder (Brown):

For customers in European countries except the United

Kingdom:

1 Power cord 250 V 10 A (2.4 m):

2 Plug holder (Brown):

If the unit is used in the area except above, please contact

your local Sony Sales Office/Service Center.

! 1-557-377-11

3-613-640-01

AC inlet

! 1-782-165-11

3-613-640-01

AC inlet

! 1-782-164-11

3-613-640-01

AC inlet

DNW-75/75P

DNW-65/65P