Sony BVP-E10 Series Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Видеокамера Sony BVP-E10 Series. Sony BVP-E10 Series 38 страниц. Color video camera

Печатать страницу

a Handle buttons

The function of each of these buttons is assignable in the

menu operation.

At the factory, the front-side button is set to RET 1, and the

rear-side button is set to INCOM.

RET 1 (return video 1): A return video 1 signal from the

Camera Control Unit (CCU) is displayed on the

viewfinder screen while this button is pressed.

INCOM (intercom): The intercom microphone is ON

while this button is pressed.

For details, see "Menu Operation".

b Viewfinder lock lever

Locks the viewfinder after adjusting the position in the

front-to-rear direction together with the LOCK knob.

c Assignable button

Desired function can be assigned to this button by the

menu operation.

On the BVP-E10/E10P, a color temperature conversion

filter of 5600K is set for the button at the factory. The

setting can be changed with the OPERATION Menu.

On the BVP-E10WS/E10WSP, nothing is set. Set the

function with the OPERATION Menu as required.

For details, see "Menu Operation".

d ND filter selector

Selects the desired ND filter.

Filter No.

Filter

Clear

1/4ND

1/16ND

1/64ND

e CC (color temperature conversion) filter (BVP-

E10WS/E10WSP only)

Selects the desired CC filter suitable for the lighting

conditions.

Filter No.

Filter

Cross filter

3200K (Clear)

4300K

6300K

f WHITE BAL (white balance memory select) switch

Selects the white balance adjustment method and memory

cell to store the adjusted value.

PRESET: White balance is automatically adjusted to the

preset value for the color temperature of 3200K.

A or B: Memory cell A or B is selected.

g OUTPUT/DCC (output signal select/auto knee)

switch

Selects an output signal supplied to a VTR, viewfinder,

and video monitor (color-bar signals or camera picture).

When a camera picture is selected, the auto knee function

can be activated.

BARS/OFF: Color-bar signals are output, and the auto-

knee circuit does not function.

CAM/OFF: A camera picture is output, but the auto-knee

circuit does not function.

CAM/ON: A camera picture is output, and the auto-knee

circuit functions.

h GAIN switch

Selects the appropriate video gain according to the

illumination of the subject to be shot. The values for

positions L, M, and H, are set with the OPERATION

Menu.

For details, see "Menu Operation".

i VTR switch

When a portable VTR is connected to the camera via the

CA-530/570/570P/950/950P Camera Adaptor, the VTR

starts recording as follows:

SAVE: Power-save position for recording. Recording

starts a few seconds after the VTR START button is

pressed. A newly recorded picture may not smoothly

be connected to the previously recorded part.

STBY (standby): Recording starts immediately upon

pressing the VTR START button.

Note

The WHITE BAL, OUTPUT/DCC, GAIN, and VTR

switches do not function when the camera is connected to

a Camera Control Unit (CCU), RCP or Remote Control

Unit (RM).

j STATUS/CANCEL switch

STATUS: Displays the setting status of the camera on the

viewfinder screen when the switch is set to this

position after setting the DISPLAY switch to ON.

CANCEL: Cancels the selection made by the MENU

SELECT knob and restores the previously selected

menu item.

k DISPLAY switch

Used for displaying the current status of the camera,

settings of format and assignable buttons, and menu on the

viewfinder screen.

ON: Display function activated

OFF: Display function not activated

MENU: A screen for setting the displaying items and

functions appears.

For details, see "Menu Operation".

Location and Function of Parts