Argo LUDVIG Руководство по эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Кондиционер Argo LUDVIG. Argo LUDVIG 20 страниц.

pressed, the adjustment step is 0.5 hours up to 9 hours, while from 10 to 24 hours the adjustment step is 1 hour). The

temperature ranges from 16 °C to 32 °C, and the time ranges from 0,5h to 24h.

(5) MODE SELECTION BUTTON (MODE)

Press this button to select the various operating modes, according to the following sequence:

In the COOL mode the display lights up. In the DRY and FAN modes the display ight up.

(6) "TIMER" BUTTON

•

When the air conditioner is turned off, press "TIMER" to set a time to turn on the air conditioner. Press "+" or "-" to

set the time, and press "TIMER" again to confirm it.

•

When the air conditioner is turned on, press "TIMER" to set a time to turn off the air conditioner. Press "+" or "-" to

set the time, and press "TIMER" again to confirm it.

•

After setting the time, press "TIMER" again to cancel the set time.

Note: After setting the time, press "TIMER" again to confirm it in 5 seconds. Without any operation in 5 seconds, the

air conditioner will confirm the time automatically. Press "TIMER" after confirming the time will cancel the set time.

(7) SLEEP BUTTON

Press this button to activate the Sleep function, which automatically adapts the temperature to changes in body and

room temperature throughout the night, so as to optimise comfort when sleeping and minimise consumption

•

In cooling mode, the temperature increases by 1 °C in an hour then by 2 °C in two hours, and remains in this

setting for the whole period. The Sleep function is not available in the ventilation, dehumidification and auto

modes. The indicator light turns on whenever the Sleep function is set.

•

In Sleep mode there is no variation of the ventilation speed.

•

In cooling mode, after the first hour the set temperature increases by 1 °C, after the second hour it increases again

by 1 °C; after the 5th hour it decreases by 1 °C, continues in this way for another 3 hours now and then exits the

Sleep function continuing to operate normally in cold conditions.

(8) TEMPERATURE AND ERROR DISPLAY

With the exception of the message P1, full tank, when an error occurs do not try to repair the air conditioner, always

bring it to an Argoclima Service Center, otherwise the guarantee will not be valid anymore.

SWING FUNCTION – available only for remote controller

Press "SWING" to turn on or off the oscillation of horizontal flap.

V 04/23

AUTO

COOL

DRY

FAN

HEAT