Argo SDIBS9DC Руководство по установке - Страница 12

Просмотреть онлайн или скачать pdf Руководство по установке для Кондиционер Argo SDIBS9DC. Argo SDIBS9DC 19 страниц. Split air conditioner system
Также для Argo SDIBS9DC: Руководство по эксплуатации (15 страниц), Руководство по эксплуатации (17 страниц)

End of installation.

12 - HOME AUTOMATION WIRING

It is possible to connect the unit to a Home Automation system, according to the following instructions:

13 - PUMP DOWN (See Installation Instruction of Outdoor Unit)

Pump down means collecting all refrigerant gas in the system back into the outdoor unit without losing gas. Pump down

is used when the unit is to be moved of before servicing the refrigerant circuit.

- TEST OF THE SYSTEM AND CONTROL OF THE AIR VOLUME TO THE

OUTLET GRILLES

Below you can find the head curves (static pressure) available at the unit outlet according to the air flow and the speed

selected on the remote control:

100

SDIAS8DC

200

300

400

m3/h

ON/OFF (Terminals O O) - DEFAULT FACTORY STATE: CLOSED

Contact open: the unit does not operate (always OFF) - inputs from

the remote control unit are not processed.

Contact closed: the unit operates in the normal way, according to the

inputs coming from the remote control unit.

ALARM (Terminals L N) :

These terminals are connected to the contact (normally open) of a

power relay that is activated every time any alarm occurs on the unit.

When an alarm occurs, the poles of the terminal block will have a

voltage of 220-240V ~ 50Hz Max. electric load: 3A

500

600

700