Argo SLIMMY Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Кондиционер Argo SLIMMY. Argo SLIMMY 13 страниц.

3. VENTILATION MODE (FAN ONLY)

•

Press the MODE button to select Fan and wait until the relative icon appears.

•

In this mode, the fan speed can be adjusted.

•

The temperature cannot be adjusted.

This appliance automatically vaporises condensate in the cooling mode.

When the air conditioner operates in cooling mode, there is no need to drain condensate continuously; only in certain

weather conditions with very humid air may it occur that water deposits inside the unit. When its inner tank is full, the air

conditioner beeps 8 times and the message "H8" appears on the display to signal that the tank is full and stop the

appliance's operation.

INSTALLATION OF THE DRAINAGE HOSE

1. Remove the rubber plug at the back of the unit (1).

3. Screw the drainage hose (4) onto the

drainage opening then secure it with the

clip (2).

Insert the cap onto the other end of the

drainage hose (1), secure it with the clip

(2) then insert it into the clamp (3).

V 12/15

CONDENSATE ELIMINATION

2. Mount the clamp (2) onto the back of the unit, to the

right of the drainage opening (1), using a screw (3).

Cooling

When the unit operates in the cooling mode, ensure that the rubber

cap closing the drainage opening on the back of the appliance is

properly positioned.

To empty the container, switch the air conditioner off and unplug

the cord. Remove the cap from the rear drainage opening and

place its end over a normal drain.

Ensure that the tube is not twisted or bent. The tube must slope

downwards. Re-close the drainage opening with the cap, insert it

into the clamp and resume use of the air conditioner.