Argo CLOVER Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Нагреватель Argo CLOVER. Argo CLOVER 12 страниц. Wall-mounted ceramic fan heater

1 to 12 hours, by pressing on the same button to move on in intervals of 1 h.

TIME SETTING (only from the remote control)

Press the SET button to show the time on the display; press the + or – buttons to set the current hour (00-23); press

the SET button again to set the minutes (00-59); press the SET button again to set the day of the week – if you press

+ or – the display will show the following abbreviations: d1, d2, d3,... which correspond respectively to Monday,

Tuesday, Wednesday etc.; once you have selected the current day press OK to confirm.

SETTING THE WEEKLY TIMER (only via the remote control)

After having set the time and day of the week, press P to enter the weekly timer setting:

1. Press DAY to set the switch-on day (d1, d2, d3,...),

2. Press EDIT to set the operating periods for the fan heater (P1, P2,... P6)

3. Press TIMER/ON to set the switch-on time (00-24)

4. Press TIMER/OFF to set the switch-off time (00-24)

5. Press the + or – buttons to set the desired temperature

6. Press OK to confirm the settings

To set any other subsequent operating times, (max 6) repeat the procedure from point 2 to point 6.

Repeat the procedure from point 1 to set the other days of the week.

After completing the weekly timer setting, press the buttons DAY EDIT TIMER/ON and TIMER/OFF to check the settings

for each day.

All settings are deleted when the fan heater is switched off using this switch

"OPEN WINDOW SENSOR" FUNCTION SETTING

When the appliance is operating, press the

the LED

appears on the display, as shown in the figure:

Press the + or – buttons to set the temperature. When this function is active, if the room temperature drops by 5-10 °C

in less than 10 minutes, the fan heater stops operating and switches to stand-by mode.

Press

to restart the appliance. If both the weekly timer and open window functions are set and, according to

the weekly programme, the appliance is off, the window open function will also be inactive. Conversely, when the

appliance is operating in line with the weekly programme, the window open function can control the ON/OFF

operation of the appliance.

V 07/22

button on the remote control to activate the open window function;

°C

no week timer

function set

°C

with week timer

function set