Cisco 6160 Руководство по процедурам установки - Страница 29

Просмотреть онлайн или скачать pdf Руководство по процедурам установки для Сетевое оборудование Cisco 6160. Cisco 6160 32 страницы. Without a pots splitter configuration
Также для Cisco 6160: Краткое справочное руководство (38 страниц), Руководство по установке оборудования (21 страниц), Указания по установке и замене (18 страниц)

Cisco 6160 Руководство по процедурам установки
Chapter 4
Installing a Cisco 6160 Without a POTS Splitter Configuration
First, would you like to see the current interface summary? [yes]: yes
Interface
ATM0/0
Ethernet0/0
ATM0/1
ATM0/2
ATM18/0
ATM18/1
ATM18/2
ATM18/3
ATM21/0
ATM21/1
ATM21/2
ATM21/3
ATM26/0
ATM26/1
ATM26/2
ATM26/3
Configuring global parameters:
Enter host name [DSLAM]: sw-ni2-2
The enable secret is a password used to protect access to
privileged EXEC and configuration modes. This password, after
entered, becomes encrypted in the configuration.
Enter enable secret: lqb
The enable password is used when you do not specify an
enable secret password, with some older software versions, and
some boot images.
Enter enable password [lab]: lab
The virtual terminal password is used to protect
access to the router over a network interface.
Enter virtual terminal password [lab]:
Configure SNMP Network Management? [no]:
Configure IP? [yes]:
Configure IGRP routing? [yes]: no
Configuring interface parameters:
Do you want to configure ATM0/0
Configure IP on this interface? [yes]:
IP address for this interface [70.0.0.2]:
Subnet mask for this interface [255.0.0.0] :
Class A network is 70.0.0.0, 8 subnet bits; mask is /8
Do you want to configure Ethernet0/0
Configure IP on this interface? [yes]:
IP address for this interface [172.27.32.156]:
Subnet mask for this interface [255.255.0.0] :
Class B network is 172.27.0.0, 16 subnet bits; mask is /16
Do you want to configure ATM0/1
Configure IP on this interface? [no]:
Do you want to configure ATM0/2
Do you want to configure ATM18/0
Configure IP on this interface? [no]:
OL-2190-02 B0
IP-Address
OK? Method Status
70.0.0.2
YES NVRAM
172.27.32.156
YES NVRAM
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
unassigned
YES unset
interface? [yes]:
interface? [yes]:
interface? [yes]:
interface? [no]:
interface? [yes]:
Installation Procedures
Protocol
up
up
up
up
down
down
administratively down down
initializing
down
initializing
down
initializing
down
initializing
down
administratively down down
administratively down down
administratively down down
administratively down down
down
down
down
down
down
down
down
down
Cisco 6160 Hardware Installation Guide
4-29