Argo KASPER 11 Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Нагреватель Argo KASPER 11. Argo KASPER 11 10 страниц. Oil filled radiator
Печатать страницу
CAUTION: This radiator is filled with a precise quantity of
special oil. The repairs which require the opening of the
radiator body (such as the loss of oil) must be made only by
the manufacturer or service, which must be contacted in case
of loss of oil.
2
3
4
5
6
7
1. Element
2. Carry handle
3. Power indicator light
4. Power switch knob
In the packaging the radiator has no wheels, which must be mounted before the commissioning of the device.
Do not operate the heater without the wheels assemblies attached to the bottom of the unit. Otherwise there may be risk
of fire.
•
Loosen the nuts and washers from the wheels.
•
Attach the wheels to the axle with two metal washer and nut.
•
Turn over the radiator for easy assembly, make it sure that it's stable with no fall risk.
•
Remove the nuts from the screws U (1) and insert the screws U-shaped through holes in the assembly of the wheel
as shown (Fig. 2 and 3), hang up the wing nut and tighten firmly (fig. 4). Attention: do not over tighten, it may cause
the damage of radiator flange.
•
Repeat the same for mounting the wheels at the front and the back of the radiator.
•
Return the device upright.
V 05/21
DESCRIPTION OF PARTS
HOW TO INSTALL WHEELS
1
8
5. Thermostat knob
6. Cable reel for the power cable
7. Castor
8. Castor mounting plates
16