ACU-RITE SENC 150 Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы ACU-RITE SENC 150. ACU-RITE SENC 150 12 страниц. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Также для ACU-RITE SENC 150: Руководство по установке (8 страниц), Справочное руководство (20 страниц), Руководство по установке (4 страниц), Руководство по установке (6 страниц)

SENC 150 Reading Head Replacement Instructions

Removing the reading head

Twist brackets 45° to remove.

Slide brackets away from

reading head and cable.

 Remove the alignment brackets.

 Gently slide the reading head out of the end of the scale case.

 Place the defective reading head in a safe location.

Cleaning the glass scale

 Saturate a clean cotton swab or lint-free cloth with alcohol.

 Clean the glass scale by wiping the surface and edge.

Wipe until no residue is found on the swab or cloth.

Do not scratch the inside of the scale.

 Lip seals may be removed for glass cleaning if desired.

Gently pull seals out through the end of the scale case.

 Reinsert the lip seals into the end of the scale case, and gently

pull them through the extrusion. Center the seals in the case.

 Run a plastic pin between the lip seals to reset them into position.

4 Removing the reading head